4
First, select how you would like to mount the light unit
over your aquarium. The light can be placed directly
onto the aquarium using the supplied mounting brackets
or it can be suspended above the aquarium using the
supplied suspension cables. In order to suspend the
light unit, you will need to have mounting points which
can be either anchors on the ceiling or a bar or frame
above the aquarium. Ensure that whatever the light unit
is to be suspended from will support the weight of the
light unit.
Tank Mount
1. Slide the steel arms into the channels on the end of
the light unit.
2. Place the plastic brackets onto the sides of the
aquarium. Make sure both brackets are the same
distance from the front of the aquarium and fasten them
using the supplied plastic screws. Do not overtighten
the screws.
3. Place the ends of the arms into the holes in the top
of the brackets and ensure the light is centred over the
aquarium.
4. Connect the power supply to the light unit. The DC
plug from the power supply connects to the socet in the
back of the light unit. Connect the power supply to the
power outlet and switch the power on.
The power supply should be placed in a well ventilated
area and should be placed on a hard surface (such as
timber or tiles) due to the operating temperature.
Installation
Tank Mount
Suspension Mount
Suspension Mount
1. Attach the Suspension cables to the light unit. There
are 4 anchor points in the top of the light unit, there
is a male threaded connector on one end of each
suspension cable, these screw into the anchor points.
2. Suspend the light unit over the aquarium. To raise
the height of the light unit above the aquarium, pull
the cable through the connector at the lower end of
the cable. To lower the light unit, press the top of the
connector where the cable enters. Make sure the light
unit is supported when doing this so that the light unit
does not fall too quickly.
3. Connect the power supply to the light unit. The DC
plug from the power supply connects to the socet in the
back of the light unit. Connect the power supply to the
power outlet and switch the power on.
The power supply should be placed in a well ventilated
area and should be placed on a hard surface (such as
timber or tiles) due to the operating temperature.
