Aqua One Oakstyle Chic 3+2 Unit, Assembly Instructions Manual, Page: 16 / 20

Step 26
a:
b:
S S
Top Top
This unit must be fixed to a wall using
the Overbalance Protector Kit provided Secure the unit to a
wall
a:
Before fitting the unit
to a wall, use a spirit
level to check the top of
the unit is level,
front-to-back and
side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level.
To prevent possible
overbalancing this unit
must be secured to a
suitable wall by fitting the
Overbalance Protector
Kit to a wall.
b:
Push the unit up
against the wall and slide
the Brackets against the
wall. Fit the 2nd Screws
from the kit into the
underside of the Top
panel.
Mark the slot at the back
of the Brackets for drilling
into the wall.
Wall fixings are not
supplied as they will need
to suit the wall type.
Take care when drilling
the wall that you do not
drill into any pipes, wires
etc. If in doubt, consult an
expert.
S
S