Step
13
a:
b:
c:
d:
B
A
B
Fit the Doors and
Handles
We recommend that you
fit the top Hinge first,
then align and fit the
other Hinge.
a:
Push the Hinge
onto the front part of the
Hinge Plate.
The recess at the bottom
of Screw B goes into the
slot in the Hinge Plate.
b:
Keep the Hinge
FLAT against the Hinge
Plate as you slide it
across as far as it will go.
Tighten Screw A.
c:
The Hinge must be
flat against the Hinge
Plate prior to any
adjustment.
d:
The Hinge must NOT
BE AT AN ANGLE to the
Hinge Plate when
assembled.
This would indicate that
the recess at the bottom
of Screw B had not
located in the slot in the
Hinge Plate and the
Hinge would not be
secure.
Remove the Hinge from
the Hinge Plate and then
re-assemble being
careful to follow
instructions a-c.
Before fitting the Han-
dles, please remove
any protective film that
may be on the panels.
e:
Attach a Handle to
each of the Doors.
G
G
J
J
8
7