background image

Place the aquarium on top of 

Cabinet. 

 

Install Filter (see filter instructions for details) 

 

Install Heater (see heater instructions for details) 

 

 

Important Notice 

 
It is absolutely imperative that you ensure this cabinet and aquarium is installed upon level floor-
ing. It is also a prerequisite that you ensure the flooring upon which it is positioned is able to sup-
port the weight of this aquarium which could be up to 600kg including water and decorations. 
 
Installation  upon  uneven  flooring  will  result  in  poor  distribution  of  weight.  Damages  to  the 
aquarium, cabinet or equipment and damages caused by leaks due to improper or uneven installa-
tion are not covered by the guarantee with this product. 
 
Care and Maintenance of your Aqua One Aquarium 
 
Glass: It is recommended that you use a good quality glass cleaner and a non abrasive lint free 
cloth. Glass cleaner should only be used on the outside of the aquarium.   
 
To clean the glass on the inside of the aquarium, it is recommended that you use an Aqua One 
Scraper or Magnetic Cleaner (available from your local Aqua One dealer).  
 
Cabinet and Hood: The use of a damp cloth is recommended, do not use any detergents or harsh 
chemicals to clean the cabinet and hood as damage may occur. 

Step 6. 

Summary of Contents for EuroStyle Bay 120









Reviews: