8
NOTE:
Your light unit is tested to IPx7.
This means that it can withstand temporary
submersion. However,
IT IS NOT A SUBMERSIBLE
LIGHT
Light tubes (please read the general electrical
safety instructions before installing the lights,
fi lter or heater)
Your new aquarium uses standard
tubes (supplied). They are available as replacement
parts from your local Aqua One dealer. Light tubes
are not covered by the guarantee. Life expectancy
is generally 10 months or more, however tubes
loose their output gradually over time. To maintain
the health of plant and aquatic life effected by the
amount of light available we suggest changing
them every 6 months.
Locating the lights
Positioning of lights on aquarium (note some
models have twin light units). The black end caps
have brackets which slide over the aquarium trim.
Please ensure light unit is fi rmly in place before
switching on. The black hood covers help secure
the lights in place.
Removing Light Tubes
Switch light off, remove from mains supply and
tank before disassembly of lights at any time.
Unscrew the white end caps of the tube holders
by turning anti clockwise (1). Both caps should
be removed before the tube is slid out. Keep end
caps as these are required for re-installing (2).
Installing new tubes
With the light unit unplugged and removed from
the tank, slide the end caps over the tube both
ends (1). Gently slide the tube pins into the end
cap receptacles (3). Fully tighten the caps back
on their threads (4). Be careful not to cross thread
as this is a water tight seal. Only use hand tight.
Ensure they are fully tightened. Test before re-
installing on to the tank.
Lighting Maintenance
1.
2.
3.
4.
Summary of Contents for Aquience 1200
Page 1: ...Aquience 1200 1500 R ...
