background image

2

GB

Important Safeguards

To guard against injury, basic safety precautions 
should be observed, including the following:

1. Read and follow all safety instructions and important 
notices in these instructions as well as on the product 
itself.

2. This appliance is not intended for use by children 
or infi rm persons without supervision. Young children 
should be supervised to ensure that they do not play 
with the appliance.

3. To avoid possible electric shocks, special care 
should be taken since water is employed in the use 
of aquarium equipment. For each of the following 
situations do not attempt repairs yourself. Return the 
appliance to an authorised service facility for service 
or discard the appliance.

a. If the appliance or any electrical component of the 
appliance (non-immersible equipment only) falls into 
the water or gets wet, do not reach for it. Unplug it and 
then retrieve it.

b. If the appliance shows any sign of abnormal 
water leakage, immediately unplug it from the power 
source.

c. Carefully examine the appliance after installation. 
It should not be plugged in if there is water on parts 
which are not intended to be wet.

d. Do not operate the appliance if it has a damaged 
cord or plug, or if it is malfunctioning, or dropped or 
damaged in any manner.

4. A “drip loop” (see graphic) should be arranged for 
each cable connecting an aquarium to a power supply. 
The drip loop is the part of the cable below the level of 
the power supply. It prevents water travelling down the 
cable and coming into contact with the power supply. 
If the plug or the socket does get wet, do not unplug 
the appliance. Disconnect the fuse or circuit breaker 
that supplies the power to the appliance, then unplug 
and examine for presence of water in the socket.

5. Always unplug the appliance from the electrical 
outlet when not in use, before putting on or taking off 
parts, before any type of maintenance or cleaning.

6. Never yank the cable to pull it from the socket. Pull 
the plug carefully to disconnect.

7. Do not use the appliance for reasons other than 
the intended use. The use of attachments that are not 

recommended or sold by the manufacturer may cause 
the product to be unsafe. This is not recommended.

8. Do not install or store the appliance where it will be 
exposed to weather or temperatures below freezing.

9. Make sure any component mounted on a tank is 
securely installed before operating it.

10. Ensure input voltage is the same voltage as your 
local power supply.

11. If an extension cable is used it should have the 
proper rating. Care should be taken to arrange the 
cord so that it will not be tripped or pulled.

12. A G.F.C.I (Ground fault circuit interrupter) & 
surge protector is recommended for all electrical 
appliances.

13. Ensure your hands are dry when turning the 
power switch on/off and when inserting/removing the 
power cable from the socket.

14. If you are in any doubt about the electrical 
installation or safety of this product you must consult 
a qualifi ed electrician.

For Guarantee Conditions, please refer to the 
Guarantee form that is enclosed with this product.

All products are supplied with fi tted  plugs. This  plug 
should not be tampered with in any way or removed. 
Removal or tampering with the plug invalidates our 
guarantee offered with this product.

For UK a 3 pin adaptor is supplied with the product 
and this must be used.

Summary of Contents for AquaZone










Reviews: