background image

MAINTENANCE 

Remove glass lid and 

light unit.

Use an algae scraper* 

and gently clean the 

glass.

Use a Gravel Cleaner* 

to empty around 25% of 

the aquarium water into 

a bucket. 

Never rinse the Sponge under the tap as you 

will kill the beneficial bacteria that live on the 

filter media and disrupt the balance of the tank.

Replace the carbon cartridge every 6-8 

weeks or sooner as required.

Fill the bucket with 

new water and 

treat it with water 

conditioner*. Allow to 

stand for 10 minutes.

Gently refill the 

aquarium with the 

prepared water.

Replace all equipment 

on the aquarium. Check 

that your hands and 

power plugs are dry, and 

turn power back on.

Check that all 

equipment is working 

correctly over the 

next half hour.

Evaporated 

Water

Maximum 

Water 

Level

Current 

Water 

Level

Feed fish.

Check water leveland 

top up if required.

Check temperature  

and all equipment.

Remove and rinse 

the filter sponge and 

carbon cartridge in 

the old water from the 

aquarium.

*sold separately

Daily

Fortnightly - 25% Water Change

Test water parameters.

Weekly

Place the glass lid somewhere safe where 

it will not be broken while you are servicing 

the aquarium.

The fish and plants do not need to be removed when 

doing regular maintenance.

Place a towel on the floor in front of the aquarium in 

case of water spillage.

Summary of Contents for AquaNano 30













Reviews: