Step
13
J
Fit the Doors and
Handles
The easiest way to
attach each Door is to fit
the top Hinge first, then
align and fit the other
Hinge.
a:
Push the Hinge
onto the front part of the
Hinge Plate.
The recess at the bottom
of Screw B goes into the
slot in the Hinge Plate.
b:
Keep the Hinge
FLAT against the Hinge
Plate as you slide it
across as far as it will go.
Tighten Screw A.
c:
The Hinge must be
flat against the Hinge
Plate prior to any
adjustment.
d:
The Hinge must NOT
BE AT AN ANGLE to the
Hinge Plate when
assembled.
This would indicate that
the recess at the bottom
of Screw B had not
located in the slot in the
Hinge Plate and the
Hinge would not be
secure.
Remove the Hinge from
the Hinge Plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach a Handle to
each Door using the
25mm Screws.
e:
Peel off the protective coating on the
panels and edging tape where present
a:
b:
c:
d:
L
M
L
L
B
L
M
M
M
A
M
L
B
E
E
J
7
8
