9. Prior to installing the head unit, turn it over so
you can see the impeller. Make certain that the
power cord is not wet and plug it into the
receptacle then turn it on and ensure it is
working. If the impeller does not turn see
Cleaning Your Filter for instructions on how to
assess the impeller. Remove the Black sealing
O-ring from the feeder pipe. Fig 7 and place it on
the filter inlet pipe on the top filter basket. Fig 6
10. Line the filter inlet pipe up with the feeder
pipe on the base of the head unit.
11. Press down gently, the bottom of the head
unit should be flush with the canister body. Be
careful not to jam the power cord in-between the
canister and the head unit. Do not force it
together! If it feels tight do not apply any
pressure to close it simply, remove the head unit
and filter baskets and try again. Fig 8
12. Latch and secure the clips. The filter unit is
now ready to be installed. Fig 9
Fig 6
Fig 7
Fig 9
Fig 8
Notes
Set Up Instructions
"LACK3EALING/RING
0LACE"LACK3EALING
/RINGHERE
