6
5.
Lamp’s assembly / change of lamps
When changing the fluorescent lamp, first of all the socket rings have to be released and pushed
over the pipe. Now, the pipe can be taken out.
When assembling the new fluorescent lamp, first of all the socket rings have to be pushed on the
pipe. Then the lamp can be inserted.
Please make sure that the socket rings are mounted tightly on the pipe when mounting the lamp.
The lamps are only waterproof if the rings are mounted correctly. Also pay attention that the
sealing at the socket ring is mounted correctly.
Only turn on the light when the fluorescent lamp is mounted and the socket rings are fastened
tightly. Replace broken socket rings by new original ones by AB Aqua Medic.
6.
Assembly
There are 2 different ways of mounting the sunbeam:
1.
Mounting directly underneath the aquarium cover. To do so, wood screws (not included in
shipment) are screwed through the end caps into the base (e. g. wood cover).
2.
It can be mounted onto the ceiling by AB Aqua Medic’s suspension kit aquafit (not included in
shipment). The suspension has to be screwed into the appropriate threaded holes of the end
caps.
7. Maintenance and Care
The service life of T5 bulbs will be about 6,000 to 8,000 hours. This corresponds to about 1,5 years
with a daily illumination time of 10 hours. It is recommended to exchange the bulbs before
expiration of this time interval since efficiency and colour composition change.
Clean the sunbeam from time to time using a moistened cloth. Never use any additional cleaning
agents!
8. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer’s
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss.
Please note that the product is not defective under the terms of this warranty where the product,
or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used.
These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance.
Before calling your dealer please ensure you have read and understood the operating instructions.
If you have any questions your dealer cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 10/2010