8
1.
Rubber feet
7. Housing’s sealing
2.
Holding plate
8. Pump lock
3.
Pump motor
9. Seals for pressure connections
4.
Rear bearing
10. Filter basket
5.
Impeller rotor
11. Sealing plug
6.
Front bearing
Fig. 2: DC Runner 2.3 + 3.3
1. Rubber feet
10. Adhesive sleeve D 25
2. Holding plate
11. Adhesive sleeve D 32
3. Pump motor
12. Hose connection pressure side
4. Rear bearing
13. Hose connection suction side
5. Impeller rotor
14. Union nut pressure side
6. Housing’s sealing
15. Union nut suction side
7. Pump lock
16. Filter basket
8. Seal for pressure connections
17. Sealing plug
9. Seal for pressure connections
Fig. 3: DC Runner 5.3 + 9.3
1. Rubber feet
5. Impeller rotor
9. Adhesive sleeve D 32
2. Holding plate
6. Housing’s sealing 10. Hose connection
3. Pump motor
7. Pump lock
11. Union nut
4. Rear bearing
8. Seal for pressure 12. Filter basket (only DC Runner 5.3)
connections
Available spare parts: Please refer to www.aqua-medic.de.
The pump may only be operated with water
. An installation out of water is possible. The max. water depth
is 1 m / 40 in.
6. EcoDrift Control
Safety advices
The pump is constructed for indoor aquarium use only. Before working on the aquarium, the power
plug must be disconnected from the mains. The connection cable and the power plug must not be
changed. If the power cable is damaged, the pump must be scrapped.
Summary of Contents for DC Runner 1.3
Page 2: ...2 ...