Revised 7/28/20
Copyright © 2020 Aqua Creek Products All Rights Reserved
Revised 7/28/20
Portable Pro Pool 2 Assembly Instructions
LOOP ON TOP
FOR EASY ACCESS
THREAD THROUGH
SLOTS AND PINCH
TOGETHER TO HOLD
4. Attach seat belt to the seat as shown in diagram to the
right.
5. Place the battery on the charger and bring to a full charge.
6. Apply dielectric grease on the metal tabs of the battery
and the control box on the lift.
7. Mount the battery onto the control box on the lift and
snap the battery into place. Listen for a ‘click’ when the
battery is installed properly. There should be no gap
between the battery and control box. See FIGURE 1.
NOTE: To extend battery life, always store battery on the
charger when the lift is not in service.
FIGURE 1
ATTACH FULLY
CHARGED BATTERY
CONTROL BOX
5
