5
5.3 Speed Setting
Note: The inverter module can be operated manually or automatically at regular intervals.
The system automatically saves the 4 latest valid settings.
NO.
Buttons
Used
Screen
Comments
1
When plug in, this button lights on, the device still in OFF
mode.
Press the button to unlock the screen
2
Press the button to start. The pump will run at a
maximum speed(2900rpm) for a one-minute
self-priming.
3
Use
or
to adjust by 50RPM to a specific
running speed if needed.
5.4 Timer Setting
*Overlap setting of time will be considered as invalid, the device will only run based on the
previous valid setting.
*During timer setting, if you want to abandon it, hold
for 3 seconds.
1.enter timer setting
2.set current time
3.to next time
4.choose a speed range for timer 1
5.decide the specific
speed
6.repeat above steps to set other 3
timers
7.hold 3 seconds to save setting
8.check 4 timers to make sure there
is no invalid setting