Aqua Creek Products F-MTY400-03 Manual Download Page 15

Revised 6/24/20

Copyright © 2020 Aqua Creek Products All Rights Reserved

Revised 6/24/20

Revised_1.16.2019 

AQUA CREEK PRODUCTS, LLC LIMITED FIVE (5) YEAR WARRANTY: 

MIGHTY LIFT SERIES 

(ITEM #’s F

-MTY400 & F-MTY600) 

 

Aqua  Creek  Products,  LLC  (a.k.a.  Aqua  Creek)  warrants  to  the  original  end  user  purchaser  that  products  manufactured  by  Aqua 

Creek, when properly installed in accordance with assembly and installation instructions, and properly used and maintained, shall be 

free from defects in material and workmanship for a period of 

five (5) years from the date of original purchase

, provided that Aqua 

Creek receives prompt notice in writing of any defect or failure and satisfactory proof thereof, with the following exception(s): 

 

Exceptions:

   

 

All electrical components, including the linear actuator shall have the following warranty period: 

o

 

Year 1-2: 100% Coverage 

o

 

Year 3: 60% Coverage (Customer is responsible for 40% of replacement cost) 

o

 

Year 4: 50% Coverage (Customer is responsible for 50% of replacement cost) 

o

 

Year 5: 40% Coverage (Customer is responsible for 60% of replacement cost) 

 

Hydraulic actuators and mesh slings shall have a warranty period of 

one (1) year from the date of original purchase

 

Powder coat finish scratches, scrapes, corrosion, or dents from customers normal use, negligence, or abuse 

 

This  warranty  specifically  excludes  reimbursement  for  labor  to  remove,  repair,  or  install  the  product  and  any  shipping  charges.  

These warranties do not cover any damages due to accident, force majeure, act of nature, misuse, abuse, negligence or failure to 

properly maintain any products, or normal wear and tear from day to day operations. In the event that any products are altered, 

repaired, or improperly installed or improperly used by anyone without the prior written approval by Aqua Creek, all warranties are 

void. IMPORTANT: AMOUNT OF WEIGHT PLACED ON LIFT SHALL NOT EXCEED THE RATED LIFTING CAPACITY FOR THE LIFT. NEVER 

OPERATE THE LIFT UNDER LOAD IN A DRY POOL (WITH NO WATER IN THE POOL).  It is the responsibility of the lift owner to verify 

the weight of the patron for warranty claim purposes and to ensure that the lift is not overloaded.  Non-payment for product to 

Aqua Creek may void warranty. 

 

To  initiate  a  warranty  claim,  the  owner  of  an  Aqua  Creek  product  must  provide  the  place  of  purchase,  in  writing,  with  a  full 

description of the product, its serial number, the dates of purchase and installation, and the exact nature of the defect. Within thirty 

(30) days after receipt of a written warranty claim by Aqua Creek, and barring any unforeseen delays, the place of purchase will be 

notified of Aqua Creek’s decision regarding the claim.

 

 

If  requested  by  Aqua  Creek,  any  defective  product  must  be  returned,  freight  prepaid  by  customer

,  to  Aqua  Creek’s  designated 

factory location or duly appointed distributor for inspection and/or repair. Aqua Creek will, at its option, repair or replace the failed 

or defective item, and deliver the repaired product or replacement to the customer.  All freight charges are the responsibility of the 

customer. Products returned to Aqua Creek for which Aqua Creek provides replacement under this limited warranty shall  become 

the property of Aqua Creek.  A new warranty period shall 

NOT

 be established for the repaired or replaced products. Such products 

shall remain under warranty only for the remainder of the original warranty period on the original products purchased.  

 

This written limited warranty constitutes the final, complete and exclusive statement of warranty terms. No person or organization 

is authorized to make any other specific or implied warranties or representations on behalf of Aqua Creek. 

 

THE  WARRANTIES  SET  FORTH  HEREIN  ARE  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED,  WHICH  ARE  HEREBY  DISCLAIMED  AND  EXCLUDED, 

INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE. 

 

THE  SOLE  AND  EXCLUSIVE  REMEDIES  FOR  BREACH  OF  ANY  AND  ALL  WARRANTIES  WITH  RESPECT  TO  THE  PRODUCTS  SHALL  BE  LIMITED  TO  REPAIR  OR 

REPLACEMENT AT AQUA CREEK’S DESIGNATED FACTORY LOCATION, OR DULY APPOINTED DISTRIBUTOR, OR IN PLACE AT AQUA CREEK’S OPTION. I

N NO EVENT 

SHALL AQUA CREEK’S LIABIL

ITY EXCEED THE ENTIRE AMOUNT PAID TO AQUA CREEK BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT. 

 

IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES OR 

LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE.  

 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY FROM STATE TO STATE.  SOME STATES DO NOT 

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, SO SOME OF THE ABOVE LIMITATIONS OR EXCLUSIONS MAY 

NOT APPLY TO YOU. 

Aqua Creek Products, LLC 

9889 Garrymore Lane 

Missoula, MT 59808 

Toll Free: (888) 687-3552 

Local/Intnl: (406) 549-0769 

www.aquacreek.com 

15

Summary of Contents for F-MTY400-03
















Reviews: