MIGHTY LIFT
-SEAT RAISED
-LIFT PARALLEL TO CART
SCOUT EXCEL
-SEAT RAISED
-LIFT PARALLEL TO CART
LIFTING FORKS
TRANSPORT CART
-FORKS LOWERED
-CART PARALLEL TO LIFT
FIG. 01
STEP 02
STEP 03
DETAIL STEP 02
SCALE 1 : 8
FIG. 03
SAFETY STRAP
FIG. 03 & 04
EARS
DETAIL STEP 03
SCALE 1 : 6
STEP 02: ROLL THE CART INTO POSITION UNTIL THE
LIFTING FORKS ARE AROUND THE LIFT HOUSING.
THERE SHOULD BE ABOUT A 1/2" SPACE BETWEEN THE
BACK OF THE LIFT HOUSING AND THE CART. CONNECT
THE STAP HOOKS THROUGH THE EARS OF THE LIFT
(SCOUT EXCEL - FIG. 03) OR THE RUBBER GROMMETS
(MIGHTY - FIG. 04). PULL THE STRAP UNTIL TIGHT.
FIG. 02
LIFT HOUSING
LIFTING FORKS
STEP 03
H
DETAIL H
SCALE 1 : 6
FIG. 04
RUBBER
GROMMETS
STEP 03: TURN THE WINCH
HANDLE CLOCKWISE TO RAISE
THE LIFT UP AND OUT OF THE
ANCHOR. IF THE LIFT WON'T
MOVE, SHAKE THE MAST OF THE
LIFT TO LOOSEN IT IN THE
ANCHOR AND TURN THE HANDLE
UNTIL THE LIFT COMES OUT OF
THE ANCHOR. RAISE THE LIFT
UNTIL THE STEM IS AN INCH OR
TWO ABOVE THE FLOOR. THE LIFT
IS READY FOR TRANSPORTATION.
(FIG. 05)
FIG. 05
LIFT REMOVED
FROM ANCHOR
DETAIL J
SCALE 1 : 12
DOWN
UP
NOTE: BEFORE USING THE TRANSPORT CART FOR THE FIRST TIME, READ THIS SECTION
COMPLETELY AND FAMILIARIZE YOURSELF WITH THE FEATURES OF THE TRANSPORT CART.
STEP 01: RAISE THE LIFT TO ITS HIGHEST POSITION AND ROTATE
THE LIFT SO THE CART CAN ROLL UP BEHIND THE LIFT. LOWER
THE TRANSPORT CART FORKS AS LOW AS THEY WILL GO. (FIG. 01)
4/27/2022 12:05:55 PM PAGE - 3
Aqua Creek Products
PRODUCT INSTRUCTIONS
