Copyright © 2019 Aqua Creek Products All Rights Reserved
Revised 6/14/19
Solar Charger Operation
CHARGE
CONTROLLER
CHARGE
CONTROLLER
(UNDERNEATH)
24V
BATTERY
LED LIGHT
STATUS
FUNCTION
GREEN LED
ON
MAIN CHARGE DURING DAYTIME
SLOW FLASH
FLOAT CHARGE
FAST FLASH
EQUALIZATION CHARGE
OFF
CONTROLLER CONNECTED TO BATTERY,
NIGHT DETECTED
YELLOW LED
YELLOW LED 1 (L) ON
BATTERY POWER LOW
YELLOW LED 2 (M) ON
BATTERY POWER MEDIUM
YELLOW LED 3 (H) ON
BATTERY POWER HIGH
RED LED
OFF
NORMAL OPERATION
FLASH
OVERLOAD OR SHORT-CIRCUIT OF LOAD
Once the solar charger has been installed and both the control box and battery have been plugged in,
and there is suffi cient daylight, the 24V Solar Charger will turn on and start trickle-charging the battery.
Without both the control box and battery being plugged in, the 24V Solar Charger will be off and will
remain off until both components are plugged in.
When a 24V battery is installed onto the lift, and there is suffi cient daylight, the GREEN LED will turn
on to show a 24V battery has been detected and the charger is operational. If a fully charged battery
is being used, the YELLOW LED marked “H” will light up as well. If a non-fully charged battery is being
used, either the YELLOW LED marked “M” or the YELLOW LED marked “L” will turn on, depending on how
drained the battery is.
See the table in the image above for more descriptions on what all of the LED lights mean when they are
either on or off .
The 24V Solar Charger will continue to charge the battery, even as the lift is being used. So once the 24V
Solar Charger has been installed it will function without any need for adjustment. The user should check
the indicators periodically to make sure it is working.
10
