Copyright © 2014 Aqua Creek Products All Rights Reserved
Revised 4/30/15
Disassembly F-014BAC
1) Remove the swivel wheels in back. (This contains the wheel itself, along with the PVC pipe housing
that allows it to swivel). It is all one piece. Take two D ring pins out for each swivel. Then tap on the top of
the elbow until swivel part disconnects from chair. Do the same for both swivels
2) Take the two D ring pins off to remove the 2 large wheels.
3) To remove further, take the top set of pins (2 front & 2 back) under the seat area out. Once these 4 pins
are removed the top part of the frame (seat part of chair) will separate from the bottom section. Bottom
section consists of everything below the seat frame. Use a rubber mallet to separate the sections.
7
