cuplex kryos NEXT VARIO 04/2017
The adjustment should be done while the CPU is subject to heavy load. Exam-
ples for suitable software are:
●
“Prime95“ (Great Internet Mersenne Prime Search, freeware,
www.mersenne.org)
●
“OCCT“ (OCBASE, freeware, www.ocbase.com)
Vary the positions of the adjustment
screws of the cuplex kryos NEXT
VARIO slightly and monitor CPU tem-
perature. If the CPU temperature de-
creases, proceed to adjust the screw in
the same direction. If the temperature
increases, reverse the adjustment. Per-
form the process for all four adjust-
ment screws until the water block is
optimally adjusted. No adjustment
screw should be rotated by more than one revolution from the original posi-
tion!
In order to reset the water block to the factory setting, screw in each adjustment
screw until the stop and then loosen each screw by approximately on revolu-
tion, until the marking on screw and water block align.
ATTENTION:
ATTENTION:
ATTENTION:
ATTENTION:
Disregarding the instructions may lead to severe damages! Aqua Computer
Disregarding the instructions may lead to severe damages! Aqua Computer
Disregarding the instructions may lead to severe damages! Aqua Computer
Disregarding the instructions may lead to severe damages! Aqua Computer
GmbH & Co. KG cannot be held liable for damages or injuries resulting from
GmbH & Co. KG cannot be held liable for damages or injuries resulting from
GmbH & Co. KG cannot be held liable for damages or injuries resulting from
GmbH & Co. KG cannot be held liable for damages or injuries resulting from
improper installation or use of the product!
improper installation or use of the product!
improper installation or use of the product!
improper installation or use of the product!
Thank you for choosing an aqua computer product.
94628
© 2016-2017
Aqua Computer GmbH & Co. KG – Gelliehäuser Str. 1 – D-37130 Gleichen
computer
aqua
