battery can support the scanner work continuously for up to 30 hours.
To charge the scanner, simply connect the scanner with any USB power
adapter via the included USB cable. The red and blue LED light will be
flashing alternatively while charging.
LED indicator
LED
indicator Status
Blue light flashes once
Scanned successfully
Blue light flashes
Setting mode
Red and blue flash alternatively
Charging
Power on/off
- Press the power button (trigger) will turn on the scanner and make the laser appear.
- The scanner will automatically shut off if detecting no operation in 30 se-
conds. You can also scan the following barcode to manually shut it off.
Shut down
Connect/pair the scanner with PC
This 2.4G wireless barcode scanner supports both wired and wireless
scanning.
Wired mode:
For wired scanning, simply connect the scanner to PC via the cable inclu-
ded in the package. Then power on the scanner. Your PC will install the
driver automatically. Once the driver installation of driver is finished, the
scanner is ready to be used.
Wireless mode:
The Scanner is already paired to the receiver by default. To use the scan-
ner, plug the receiver to any USB port on your PC and scan the following
pair code.
Pair code
12
