Aqara Water Leak Sensor, Quick Start Manual

Page: 4 / 52

English
1. Before activating the accessory, please make sure you have
the Aqara Home app downloaded and Aqara hub installed.
2. Please open the app, tap “Home” and then tap “+” in the top
right corner to enter “Add Device (Accessory)” page. Select
“Water Leak Sensor”, and add it according to
* If the connection fails, please move the accessory closer to the Hub
* Avoid metal surface to maximize signal strength.
Quick Setup
Installation
Option 1: Place it directly on the surface where you need
instructions.
and try again.
to monitor water leak.
Effective Range Test: Single press the reset button on the
accessory at your desired position. If the Hub makes voice
prompts, it indicates that the accessory can communicate
effectively with the Hub.