Aqara JT-BZ-03AQ/A, User Manual

Page: 8 / 42

Status signal of the detector
The detector is equipped with a wireless networking interface, which
can output the following status signals.
3. Please do not stick the mounting plate on the surface of the wall
paint and other coatings, otherwise the sticking position is prone to
peeling after a period of time, resulting in falling off of the detector.
4. Remove the protective film on the other side of the adhesive sticker,
stick and secure the mounting plate evenly.
5. Make sure that the mounting plate is firmly stuck within 30 seconds
(it is recommended to leave it still for 24 hours before installing the
detector).
6. Align the "△" mark on the back of the detector with the same mark
on the mounting plate, and rotate clockwise to fix it.