Cube Controller
7
/
9
3. Product instructions
3.1. Instructions on button functions
3.2. Instructions for installation
This product can be placed at any location without being installed.
Please put the cube on a flat and hard surface prior to use. Some actions may not be identified if the
cube is put on the surface of a soft object such as sofa, bed and pillow.
* In case of any addition failure, please move this product closer to the gateway and try again.
3.3. Usage Instructions
Activate the APP, click the "+" on the top right corner of the first page, enter the page for “Adding
the Device” (accessories) , select “Cube Controller”, and proceed with your operations according to
the tips;
* In case of any addition failure, please move the gateway closer to this product and try again.
Effective distance verification: After pressing the button
“
Device Reset
”
, the gateway sends out a
cue note, indicating that effective communication is available between the device and the gateway.
Search for the device: Activate the APP, enter the page "List of Devices (Accessories)". After
pressing the button
“
Device Reset
”
, the gateway sends out a cue note, while the corresponding
device icon on the APP will flash.
* This function is supported by Aqara Home APP only.
Button Pressing
Description
Press once
To verify the effective distance and search for the device
Press for 5s
To reset the device