2M-Z24232 Owners Manual for Built-In Rectangular T’Stat W
armers
FEATURES & OPERATING CONTROLS
2
A. THERMOSTAT
1. On THERMOSTATICALLY CONTROLLED warmers, power
is applied to the heating element according to the control knob
position and the actual temperature at the temperature sensing
thermo bulb.
2. The desired temperature is controlled by rotating the
TEMPERATURE CONTROL KNOB. The knob has a numeric
scale, where higher numbers correspond to higher temperature.
3. On warmers equipped with an INDICATOR LIGHT, the light will
glow when the thermostat is calling for heat (i.e. the element is
energized).
4. The TEMPERATURE CONTROL KNOB will rotate approximately
300º, and will reach a “stop” at both ends. The
OFF
position is
marked.
NOTE: The dial position is an indication of the temperature setting.
Actual temperature will vary depending upon the type of product and
food consistency.
B. MOUNTING
TM-12L Series warmers require a cutout and mounting holes in the
counter top. See the Installation Instructions, supplied with the particular
warmer, for details.
INDICATOR
LIGHT
TEMPERATURE
CONTROL
KNOB
IL2468-011B-2
