background image

16 

 

APW WYOTT EQUIPMENT LIMITED WARRANTY 

APW  Wyott  Foodservice  Equipment  Company  warrants  it's  equipment  against  defects  in  materials  and  workmanship,  subject  to  the 
following conditions: 

This warranty applies to the original owner only and is not assignable. 

Should any product fail to function in its intended manner under normal use within the limits defined in this warranty, at the option of 
APW  Wyott  such  product  will  be  repaired  or  replaced  by  APW  Wyott  or  its  Authorized  Service  Agency.  APW  Wyott  will  only  be 
responsible for charges incurred or service performed by its Authorized Service Agencies. The use of other than APW Wyott Authorized 
Service Agencies will void this warranty and APW Wyott will not be responsible for such work or any charges associated with same. The 
closest APW Wyott Authorized Service Agent must be used. 

This warranty covers products shipped into the 48 contiguous United States, Hawaii, metropolitan areas of Alaska and Canada. There will 
be no labor coverage for equipment located on any island not connected by roadway to the mainland. 

Warranty coverage on products used outside the 48 contiguous United States, Hawaii, and metropolitan areas of Alaska and Canada may 
vary. Contact the international APW Wyott distributor, dealer, or service agency for details. 

Time Period 

One year for parts and one year for labor, effective from the date of purchase by the original owner. The Authorized Service Agency may, 
at  their  option,  require  proof  of  purchase.  Parts  replaced  under  this  warranty  are  warranted  for  the  un-expired  portion  of  the  original 
product warranty only. 

Exceptions 

*  Gas/Electric  Cookline:

  Models  GCB,  GCRB,  GF,  GGM,  GGT,  CHP-H,  EF,  EG,  EHP.  Three  (3)  Year  Warranty  on  all 

component parts, except switches and thermostats. (2 additional years on parts only. No labor on second or third year.) 

*  Broiler Briquettes, Rock Grates, Cooking Grates, Burner Shields, Fireboxes:

 90 Day Material Only. No Labor. 

*  Heat Strips:

 Models FD, FDL, FDD, FDDL. Two (2)Year Warranty on element only. No labor second year. 

*  Glass Windows, Doors, Seals, Rubber Seals, Light Bulbs:

 90 Day Material Only. No Labor. 

In all cases, parts covered by extended warranty will be shipped FOB the factory after the first year. 

Portable Carry In Products 

Equipment  weighing  over  70  pounds  or  permanently  installed  will  be  serviced  on-site  as  per  the  terms  of  this  warranty.  Equipment 
weighing 70 pounds or under, and which is not permanently installed, i.e. with cord and plug, is considered portable and is subject to the 
following warranty handling limitations. If portable equipment fails to operate  in its intended manner on the first day of connection, or 
use, at APW Wyott's option or its Authorized Service Agency, it will be serviced on site or replaced. 

From  day  two  through  the  conclusion  of  this  warranty  period,  portable  units  must  be  taken  to  or  sent  prepaid  to  the  APW  Wyott 
Authorized Service Agency for in-warranty repairs. No mileage or travel charges are allowed on portable units after the first day of use. If 
the  customer  wants  on-site  service,  they  may  receive  same  by  paying  the  travel  and  mileage  charges.  Exceptions  to  this  rule:  (1) 
countertop warmers and cookers, which are covered under the Enhanced Warranty Program, and (2) toasters or rollergrills which have in 
store service. 

Exclusions 

The following conditions are not covered by warranty: 

*  Equipment failure relating to improper installation, improper utility connection or supply and problems due to ventilation. 

*  Equipment that has not been properly maintained, calibration of controls, adjustments, damage from improper cleaning and 

water damage to controls. 

*  Equipment that has not been used in an appropriate manner, or has been subject to misuse or misapplication, neglect, abuse, 

accident, alteration, negligence, damage during transit, delivery or installation, fire, flood, riot or act of god. 

*  Equipment that has the model number or serial number removed or altered. 

If the equipment has been changed, altered, modified or repaired by other than an Authorized Service Agency during or after the warranty 
period, then the manufacturer shall not be liable for any damages to any person or to any property, which may result from the use of the 
equipment thereafter. 

This warranty does not cover services performed at overtime or premium labor rates. Should service be required at times which normally 
involve overtime or premium labor rates, the owner shall be charged for the difference between normal service rates and such  premium 
rates.  APW Wyott does not assume any liability for extended delays in replacing or repairing any items beyond its control. 

In all cases, the use of other than APW Wyott Authorized OEM Replacement Parts will void this warranty. 

This equipment is intended for commercial use only. Warranty is void if equipment is installed in other than commercial application. 

Water Quality Requirements 

Water supply intended for a unit that has in excess of 3.0 grains of hardness per gallon (GPG) must be treated or softened before being 
used. Water containing over 3.0 GPG will decrease the efficiency and reduce the operation life of the unit. 

Note: Product failure caused by liming or sediment buildup is not covered under warranty. 

"THE  FOREGOING  WARRANTY  IS  IN  LIEU  OF  ANY  AND  ALL  OTHER  WARRANTIES  EXPRESSED  OR  IMPLIED 
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSES AND 
CONSTITUTES THE ENTIRE LIABILITY OF APW WYOTT. IN NO EVENT DOES THE LIMITED WARRANTY EXTEND 
BEYOND THE TERMS STATED HEREIN." 

 

9/05 

Summary of Contents for GGM -24i

















Reviews: