Page 30
ba_vs_v1.0_en.docx
•
Spare parts must at least comply with the technical requirements specified by the implement
manufacturer! This is ensured with original parts!
•
Cleaning must be performed with water or compressed air. Cleaning must be carried with the
implement lowered, shut down and secured to prevent it being switched on again.
15.6 Tyres
•
When working on the tyres, it must be ensured that the implement is safely parked and secured
against rolling away (wheel chocks).
•
The mounting of wheels and tyres requires sufficient knowledge and proper installation tools.
•
Repair work on the tyres may only be performed by specialists and with suitable installation tools.
•
Check the inflation pressure regularly. Observe the prescribed inflation pressure (4 bar)!
CAUTION!
Misprints, errors and omissions excepted.
16
Safety signs
Pay special attention to the stickers on the implement, as they warn you of
specific dangers!
Read and observe the
operating manual before
operating the implement!
Standing in the danger zone
(swivelling range) is
forbidden.
Caution, risk of crushing!
