Page 4
2.2 PS – Installation
•
Install the PS 120-500 with the hose
outlets in the direction of travel. Fasten
the PS with the supplied bolts (Figure 10).
3
Dispersion plate assembly and hose routing
3.1 Dispersion plate assembly
•
Install the dispersion plates with the brackets on the front cross connection of the tine bed frame
– Distance from the centre on each side approx. 300 mm. Repeat this for all tine beds (Figures
11 and 12).
3.2 Hose routing
•
Hose lengths:
2 tine beds on the centre frame: 4 pcs. of hose, each with a length of 3000 mm
2 tine beds on the inner side frame: 4 pcs. of hose, each with a length of 4000 mm
2 tine beds on the inner/outer side frame pivot point: 4 pcs. of hose, each with a length of
5800 mm
2 tine beds on the outer side frame: 4 pcs. of hose, each with a length of 2000 mm
Figure 12
Figure 10
Figure 11
