APV DELTA SW4, Operating Manual

Page: 3 / 41

Declaration of Conformity
for Valves and Valve Manifolds
SPX Flow Technology Rosista GmbH, Zechenstr. 49, D-59425 Unna-Königsborn
herewith declares that the
double seat valves of the series D2, SD4, SDT4, SDM4, SWcip4, DSV,
DA3, DE3, DEU3, DET3, DKR2, DKRT2, DKRH2
in the nominal diameters DN 25 - 150, 1“ – 6“ and 1 Sh5 - 6 Sh5
butterfly valves of the series SV1 and SVS 1 F
in the nominal diameters DN 25 - 100, DN 125 - 250 and 1“ – 4“
ball cocks of the series KH, KHV
in the nominal diameters DN 15 - 100
single seat, diaphragm and spring loaded valves of the series
S2, SW4, SWmini4, SWT4, M3, MF3, M4, MF4, MP4, MS4, AP1, APT1, CPV, RG4, RGM4,
RGE4, RGEM4, PR2, PR3, PR4, SI2, UF3, VRA,VRAH
in the nominal diameters DN 10 - 150, 1/2“ – 4“ and 1 Sh5 - 6 Sh5
and the valve manifolds installed thereof
meet the requirements of the Directives 2006/42/EC (superseding 89/392/EEC
and 98/37/EC) and GPSG - 9.GPSGV.
For official inspections, SPX Flow Technology Rosista GmbH presents
a technical documentation according to Appendix VII of the Machinery Directive,
this documentation consisting of documents of the development and construction,
description of measures taken to meet the conformity and to correspond with
the basic requirements on safety and health, incl. an analysis of the risks,
as well as an operating manual with safety instructions.
The conformity of the valves and valve manifolds is guaranteed.
Authorised person for the documentation:
SPX Flow Technology Rosista GmbH, Frank Baumbach, Zechenstr. 49, D-59425 Unna
November 30, 2010
Manager Research and Development
UK
www.sks-online.com
www.sks-webshop.com