-8-
1) Powering by AC
* To disconnect the Neutrik® powerCon cable, pull back on the yellow release tab on the cable
connector, and rotate the connector counter clockwise. Do not pull directly.
1
2
AC 100V-240V
~ ~
PUSH
Spring lock
Lock slot
*Disconnect the Head Cable by pulling up the collar on the connector. This will disengage
its locking structure. Do not pull directly.
* You can use the Cable relief hook to
manage the connection line.
Connect the Lamp Head to the control box using the LS 1200 Series 7-Pin Weatherproof
Head Cable.
5. Connect the Lamp Head to the Control Box
6. Powering Up
