APURO G784-A, Instruction Manual

Page: 5 / 12

4
Telephone Helpline : 1300 225 960 (Australia)
Changing the Cutting Disc
1.
Disconnect the appliance from the mains power supply.
2.
Turn the lid release knob anti-clockwise.
3.
Remove the food pusher (if inserted) and carefully lift the lid.
4.
Turn the disc anti-clockwise and lift it away from the appliance. This may require a sharp tap to free it
from the shaft.
5.
Slot the new disc in place. Turn the disc if necessary to drop it in place over the lugs.
6.
Turn the disc clockwise to secure it in position.
7.
Lower the lid and turn the lid release knob clockwise to secure it in place.
Using the Base Discs
Some cutting processes require two discs to be inserted into the
appliance.
1.
Open the lid and remove the cutting disc(s), as described above.
2.
Slot the desired base disc onto the appliance.
3.
Slot the 8 or 10mm slicing disc on top of the base disc, ensuring
it is securely connected to the centre pin and spins freely.
4.
Lower the lid and turn the lid release knob clockwise to secure it
in place.
WARNING: The blades on the cutting disc are sharp. Take care to avoid the edges when
changing discs.
Note: Ensure the appliance is clean and free from food debris when changing discs to
ensure the disc can be securely fitted.
Note: The deflector can also be removed by following this procedure. Removing the
deflector is necessary to thoroughly clean the appliance.
Note: The base cutting disc is not perfectly circular
and has a lip that sits in the cutter mouth to keep it
securely in place.
WARNING: Only the thinner aluminium cutting
discs are suitable for use with the base discs. DO
NOT use the thicker plastic cutting discs.