4
AU
Telephone Helpline: 1300225960
Operation
• Add water to the Water Tray if humidification is required, then place the Tray in position inside the
Merchandiser.
• Connect the Merchandiser to electricity by inserting the plug into a socket, turn on supply at socket.
• Turn switch at the rear of the Merchandiser to the on position, this will start the heating element.
• Rotate the knob at the rear of the Merchandiser to set the temperature.
• The Merchandiser is now ready for food to be displayed and kept warm.
Cleaning, Care & Maintenance
Always turn off and disconnect the appliance from the power supply before
cleaning. Always allow the appliance to cool before emptying or cleaning.
• Remove any food debris that is present in the Merchandiser after use.
• Clean the internal surfaces with a cloth that is damp with soapy water, or with a food safe cleaning
agent.
• Dry thoroughly after cleaning making sure that no moisture is left in the Merchandiser.
Removable crumb tray
• Periodically empty the crumb tray (located at the
rear of the appliance).
• Slide the tray out to empty.
• Slot back in securely when replacing the tray.
Crumb tray
Troubleshooting
If your Apuro appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
Probable Cause
Solution
Indicator Light
does not come on
& unit does not
heat up
The unit is not switched on
Check the unit is plugged in correctly and
switched on
Plug or lead is damaged
Call Apuro agent or qualified technician
Power supply
Check power supply
Thermostat has failed
Call Apuro agent or qualified technician
Indicator Light
comes on but unit
does not heat up
Heating element has failed
Call Apuro agent or qualified technician
Thermostat has failed
Call Apuro agent or qualified technician
CK916-A_A5_v1_20210526.indb 4
CK916-A_A5_v1_20210526.indb 4
2021/5/26 16:40
2021/5/26 16:40