APURO CH134-A Instruction Manual Download Page 6

6

EN

Telephone Helpline: 1300225960

Troubleshooting

A qualified technician should carry out repairs if required. 

Fault

Probable Cause

Solution

The unit is not working

Unit not switched on

Check the unit is plugged in 

correctly and switched on

Plug or lead is damaged

Replace plug or lead

Mains power supply fault

Check mains power supply

Overload protection has activated

Reset the appliance (Page 5)

Minced meat does not exit 

the appliance evenly

Barrel cap is on too tight

Loosen the cap

Cutting plate is blocked

Remove and clean the plate

Cutting blade is blunt

Replace the cutting blade

Electrical Wiring

The plug is to be connected to a suitable mains socket.

This appliance is wired as follows:

•  Live wire (coloured brown) to terminal marked L

•  Neutral wire (coloured blue) to terminal marked N

•  Earth wire (coloured green/yellow) to terminal marked E

This appliance must be earthed. 

If in doubt consult a qualified electrician.

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency 

disconnection being required they must be readily accessible. 

Compliance

The product must not be disposed of as household waste. To help prevent possible harm to human 

health and/or the environment, the product must be disposed of in an approved and environmentally safe 

recycling process. For further information on how to dispose of this product correctly, contact the product 

supplier, or the local authority responsible for waste disposal in your area.

APURO parts have undergone strict product testing in order to comply with regulatory 

standards and specifications set by international, independent, and federal authorities.

APURO products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, 

mechanical, photocopying, recording or otherwise, without the prior written permission of Apuro.

Every effort is made to ensure all details are correct at the time of going to press, however, Apuro reserves the right to 

change specifications without notice. 

CH134-A_A5_v1_20220524.indb   6

CH134-A_A5_v1_20220524.indb   6

2022/5/24   11:31

2022/5/24   11:31

Summary of Contents for CH134-A









Reviews: