APsystems YC500-A Installation/User Manual
12
APsystems YC500A/I Installation/User Manual
12
Installation Procedures
WARNING:
Insure that all
AC
and
DC
wiring is correct. Check that
none
of
the
AC
and
DC
wires are pinched or damaged. Be sure that
all junction boxes are properly closed.
NOTE:
About
A
and
B
Sides corresponding the location
of
modules,
EMA registration show acquiesce in this installation. if there are
different connection methods, please email the detail installation
drawings
to
us
to
register, or the A,
B
Sides corresponding component
location will not correspond
to
the EMA position.
Step 6 - Completing the APsystems Installation Map
Fill in the
AP
systems Registration Cards, which provide system information
and the installation map. Feel free
to
provide your own layout if a larger or
more intricate installation map is required. The layout map provided is
designed
to
accomodate labels in vertical or horizontal orientation
to
meet
all the field
PV
connections.
a. Each
AP
systems Microinverter has removable serial number labels.
Peel labels off, affix one
to
the respective location on the
AP
systems
installation map, and fill in A,B in the label below(as Figure12)
according
to
the layout on the roof(as Figure 11). Then affix another
label
to
the
PV
module frame which is easy
to
see. The warranty cards
can obtain from the appendix
of
this manual or
AP
systems website
www.APsystems.com
b. Fill the warranty cards and email
to AP
systems at
c.
AP
systems will create the EMA account and email you the account
information. Then you can use the EMA website
to
view detailed
performance
of
your
PV
system. You can learn more information on
energy monitoring and analysis system from
AP
systems website
www.APsystems.com
Figure 11
Microinverter
serial numbers
A
B
A
B
A
B
101123458044
101123458045
101123458054
……
Figure 12
Step 6 - Completing the APsystems installation map
Fill in the APsystems registration cards, which provide system
information and the installation map. Feel free to provide your own
layout if a larger or more intricate installation map is required. The
layout map provided is designed to accommodate labels in vertical or
horizontal orientation to meet all field PV configurations.
1.
Each APsystems microinverter has a removable serial number
label. Peel each label off, and affix it to the respective location
on the APsystems installation map.
2.
Fill out the warranty cards. The warranty card and installation
map are needed to register the site in the EMA.
3.
Complete the EMA Installer Account Registration form found
on the APsystems website. APsystems will create the EMA
account and email you the account information. Then you can
use the EMA website to view detailed performance data for the
PV system.
Figure 10