2
2018/01/05 REV1.1
Quick Installation Guide
Step 4: Connect microinverters to ECU.
1) Using a computer that is connected to the internet, enter the LAN IP address or
wireless IP address from the ECU display into the Internet Browser. This should bring up
the screen below.
2) Click
“Administration”
, then click
“ID management”
, and enter the inverter IDs into
the ID Management box, or use the Scanning Gun to scan the inverter IDs and copy into
the ID Management box. Or using the EMA App, scan the inverter IDs by mobile phone.
3) Click
“Update”
, and the ID will be updated in the ECU.
Step 5: Check power of the microinverters
1) Click
“Real Time Data”
from the ECU Home, to view the real-time power of all
microinverters.
2) If a microinverter does not show up, please confirm if the inverter's ID is correctly input.
Step 6: Configure time-zone
·Click
“Administration”
, then
“Date, Time, Time-zone”.
Product information is subject to change without notice.
