A P S X - P I M D E S K T O P I N J E C T I O N M A C H I N E
APSX, LLC. 2017 –
www.APSX.com
-
T
R
O
U
B
L
E
S
H
O
O
T
I
N
G
G
U
I
D
E
3
3
DO NOT TIGHTEN THE FOUR BOLTS ON BLOCK 2. THEY ARE
TIGHTENED TO A SPECIFIC TORQUE SETTING KEEPIN THE
CLAMP FORCE MEASUREMENTS ACCURATE.
NEVER UNPLUG THE MACHINE WHEN THE SPRING IS PRESSED
OR WHEN THERE IS HOT PRESSURIZED PLASTIC IN THE BARREL.
PLEASE DO NOT LEAVE THE MACHINE IDLE ABOVE MELTING
TEMPERATURE MORE THAN 30 MINUTES. THAT MAY CAUSE
DETEROIRATION ON THE PLASTIC PELLETS. THE HOPPER
ENTRY PIPE CAN ALSO JAM AND MAY NEED TO BE CLEANED.
ALWAYS ASSUME THAT GAS AT HIGH PRESSURE COULD BE
TRAPPED BEHIND THE NOZZLE AND THAT IT COULD BE
RELEASED UNEXPECTEDLY. PLEASE USE PERSONAL
PROTECTIVE EQUIPTMENT AT ALL TIMES WHEN RUNNING.
WE DO NOT SUGGEST USING THE TABLET PC FOR OTHER
APPLICATIONS OTHER THEN APSX-PIM SOFTWARE. IDEALLY,
IT SHOULD BE DEDICATED ONLY FOR APSX-PIM USE. NOT
FOLLOWING THIS SUGGESTION VOIDS THE WARRANTY.