APS YC500A-MIW Installation/User Manual
11
Step 5 - Connecting the APS Microinverter to the
PV Module
A.
Check the Microinverter datasheet for the maximum allowable
number of Microinverters on one AC branch circuit.
B.
Install a protective end cap on the open AC connector of the last
Microinverter in the AC branch circuit.
C.
Plug the AC female connector of the last Microinverter into the
male connector of the next Microinverter, and so on, to form a
continuous AC branch circuit.
WARNING:
Do NOT exceed the maximum number of Microinverters
in an AC branch circuit, as displayed on the unit label.
Figure 8
Figure 9