APS TS400-D133, Manual, Page: 3 / 8

3
Assembly
The TS400-D133 operator module can be mounted on a wall bracket or monitor arm using a
100x100mm VESA mounting device. A mounting bracket is available for installation in
equipment or cabinet fronts.
Installation in fronts:
The installation bracket 832.700.494 (accessory) is required for installation in fronts.
The required front cut-out is 180x310mm.
The two brackets are attached to the op-
erator module with the M5x6mm screws.
The operator module is fixed in the front
with the M5x70mm screws.
Wall mounting:
For wall mounting, the wall bracket 832.700.490 (accessory) is required.
The bracket is attached to the operator
module with three M4x6mm screws.
The counterpart is fixed to the wall.
The operator module is inserted into the
holder from top to bottom and locked with
the locking screws.