iBoard
®
Customer Support: [email protected]
Rev. 20210301
2
STEP 1
M6 Nylon Lock
Nut
X16
M6 Large Flat
Washer
X16
M6X1-20mm
Square Head Bolt
X16
Start installation from the driver side of the vehicle. Locate (8)
mounting positions along the rocker panel.
Insert (4) M8 Bolt Plates into the oval holes (Use the 2
nd
, 4
th
,6
th
and 8
th
holes),
(Fig 1).
M8 Flat Washer
X24
(Fig 1) Insert the M8 Bolt Plate
(Use the 2nd, 4th,6th, 8th holes)
M8 Bolt Plate
STEP 2
Assemble Driver Front Mounting Bracket
(DFM/PFM)
and the
Driver Front Support Bracket
(DFS/PFS)
with (1) M8X1.25-
20mm Hex Bolt, (2) M8 Flat Washers and (1) M8 Hex Flange
Nut. Don’t fully tighten at this time,
(Fig 2).
Attach the assembled Driver Front Mounting Bracket onto the
rocker panel. According to the position of Driver Front Support
Bracket (
DFS/PFS
), mark and drill 2 holes on the pinch weld,
(Fig 3).
(Fig 2) Driver Side Front Mounting Bracket Assembly
(1) M8X1.25-20mm Hex Bolt
(2) M8 Flat Washers
(1) M8 Hex Flange Nut
DFM/PFM
DFS/PFS
Front
(Fig 3) Mark And Drill 2 Holes on The Pinch Weld
Mark and Drill 2 Holes
Pinch Weld
Rocker Panel
DFS/PFS
M8X30 Bolt Plate
X8
M8X1.25-20mm Hex Bolt
X24
M8 Hex
Flange Nut
X32