EPM203-MRS
- Technical reference -
Rev. G
Page 40
Advanced Printing Systems
6. MECHANICAL AND HOUSING
6.1 Overall
dimensions and fixing points
See attached drawings at the end of this technical reference for overall dimensions and
recommended screws.
3D-IGES files, for mechanical details, are available upon request, ask APS for more information.
The mechanism has to be fixed using the fixing points provided for this purpose.
z
Using points 1-2-3 (all of them simultaneously).
z
Or using points 4-5 (mounting on panel, see overall dimensions drawing for panel dimensions).
To avoid any kind of deformation or distortion, a flat surface for contact areas is required, if not, the
print quality and printer’s life will be drastically reduced.
z
Point 1 is on the top of the mounting base and has a distance of 21.9mm from points 2-3 (see also the
attached drawings).
z
Points 2-3 are all on the same plane, at the mounting base of the EPM.
z
Points 4-5 are all on the same plane.
The image below shows the matching areas to be used for fixing (red coloured).
Bottom view of EPM203
