AVALON
Manual - 2018 Revision
Read and follow the instructions before packing and/or using the product
Advanced Parachute Systems Ltd
.
Bulgaria, 3400 - Montana , Zahari Stoianov str.44
www.avalonskydive.com
e-mail:
Edition
JUNE/2018
Page 23/24
3.
Maintenance & Repairs
AVALON MAINTENANCE & REPAIRS
The AVALON is built with the latest design and production technologies.
All maintenance on the AVALON Harness & Container must be done by the Manufacturer or
a qualified rigger
Attention:
The label is sewn on the left reserve riser. If this label is not present do not pack the rig.
REMOVAL OF THE CERTIFICATION OR WARNING LABEL VOIDS ALL
CERTIFICATION APPROVALS.
3.1 Maintenance frequency:
3.1.1 Reserve:
Reserve maintenance and packing: 1 year in normal* conditions of use and storage
If the conditions are different, the time between maintenance operations may be R
reduced by the user.
3.1.2 Main: One month or each 50 jumps
3.2 Maintenance procedure
Operations on the reserve container:
WARNING:
A reserve canopy is not always used in good conditions.
It is possible that your rig or some components are damaged during use (Burns, broken
stitching, etc.)
For these reasons it is necessary to check all the minor and major components before taking a
decision to reuse and repack it.
IF THERE ARE ANY VISIBLE SIGNS OF WEAR OR DAMAGE, HAVE YOUR RIG
INSPECTED A QUALIFIED RIGGER FOR ADVICE ON REPAIR OR
REPLACEMENT OF PARTS.
WARNING: NEVER USE SLIDER BUMPERS ON THE RESERVE CANOPY
Check:
-
All stitching.
-
Webbing – tapes – binding tapes – fabric integrity.
-
Plastic plate integrity.
-
Hardware for sharp edges or damage
-
Grommets for damage
Accessories:
-
AAD reserve closure loop replace with new
-
Cut away handle cables are in good condition and no damage to cable coating
-
Reserve handle for no sharp edges and swaging is in good condition
-
Reserve D-bag stitching and grommets. Replace shock cord if damaged
-
Reserve bridle is in good condition
-
Reserve pilot chute fabric, spring attachment & condition
