-
15
-
RSK24-2000/2500
CONTROL UNIT
English
SAFETY PRECAUTIONS
• Follow the manufacturer’s instructions.
• The installation team must check the correct installation and functioning of the equipment.
• Only use the product for the permitted uses specif ed. Do not use the product for purposes other than those
specif ed.
• Do not tamper with or modify the product.
• Only use original spare parts.
• Cordon off the working area to prevent the access of unauthorised persons.
• Ensure that the working area is clear of obstacles and the f oor is not slippery.
• All equipment used must be in good working condition.
• Ensure that the work area is well lit. Ensure that the work area is free from obstructions and health and safety hazards.
• Do not allow unauthorised persons into the work area.
• Ensure that someone is present in the work area at all times. Do not leave the area and equipment unattended.
1.1 PRODUCT DESCRIPTION
RSK24 2000/2500
- microprocessor unit for driving one or two motors with total maximum power rating of 100 Watt.
This unit is available in two versions: for the
Aprimatic
RAIDER 2000
operator and for the
Aprimatic
RAIDER 2500
operator.
The difference between the two versions is that the default settings for some of the operating parameters are different
(see
section 4
).
Both versions can be supplied with a radio receiver already plugged into the board.
Operator functions can be set to match user needs. This is done by modifying the operating parameters as described in
section 4.1 “Advanced Programming”
.
1.2 PERMITTED USES AND APPLICATIONS
The
RSK24 2000/2500
electronic unit has been designed for
the automatic control of
Aprimatic
RAIDER 2000
and
RAIDER
2500
operators for single- and double-wing gates.
You should note the operating restrictions specif ed in the
installation manual supplied with your operator.
Information
• Only use the product for the permitted uses
specif ed. Do not use the product for purposes other
than those specif ed.
• Do not tamper with or modify the product.
• The product must only be installed using APRIMATIC
material.
Aprimatic S.p.A.
declines all liability for damages caused
by failure to follow these instructions
1.3 TECHNICAL DATA
(Tab. 1)
Technical specif cations
Power supply voltage for accessories
230 V AC (+6 % ; -10 %)
Frequency
50/60 Hz
Power consumption (no load)
3 W
Power consumption (Max.)
100 W
(with 2 motors and accessories connected up and operating)
Operating temperature
-20°C +55°C
Storage temperature
-20°C +85°C
Relative humidity
<90% non condensing
Protection class
IP44 (only with IP44 housing)
F1 - primary transformer protection fuse
3.15 A fast blow
F2 - external accessories protection fuse (24 V DC) 500 mA fast blow
F3- electronic circuit protection fuse
5 A fast blow
Tab. 1
Summary of Contents for RSK24-2000
Page 62: ... 62 RSK24 2000 2500 ...
Page 63: ... 63 ...
