22
use and maintenance Scarabeo 50
- Scarabeo 100 4T
CONTROLS ON THE RIGHT SIDE OF THE
HANDLEBAR
NOTE
The electrical parts work only when the ignition switch is in
position “
”.
NOTE
The lighting system works only when the engine is running.
1) LIGHT SWITCH (
-
-
•
)
NOTE
Before operating the light switch, make sure that the dim-
mer switch (
-
) is in position “
”.
When the light switch is in position “
•
”, the lights are off; in posi-
tion “
“, the parking lights and the dashboard light are on; in
position “
“, the parking lights, the dashboard light and low beam
light are on.
The low or high beam can be operated by means of the dimmer
switch (
-
).
3) START PUSH BUTTON (
)
When the start push button is pressed and one of the brake le-
vers (front or rear) is activated at the same time, the starter makes
the engine run.
For the starting, see page 38 (STARTING).
100
1
2