APRILIA RS 660 2020 Manual Download Page 73

Page: 73 / 196

02_93

GPS NAVIGATION (where applicable)

The "

APRILIA MIA

" system, paired with the "

APRILIA

" application, allows GPS indi-

cations to be shown on the digital display. By means of pictograms, distance and travel
time data, the desired destination can be reached.

Consult the navigation guide by accessing the "

APRILIA

" application with your ac-

count. The navigation icon appears on the digital display after setting the destination
address.

Press and hold down MODE UP to access the GPS navigation directions and infor-
mation screen.

NOTE

BY SETTING THE DESTINATION ADDRESS THROUGH THE "APRILIA" APPLI-
CATION, THE DIGITAL DISPLAY AUTOMATICALLY DISPLAYS THE DIREC-
TIONS SCREEN.

NOTE

"SHORT PRESS": PRESS THE BUTTON AND RELEASE WITHIN 0.5 SECONDS;

"PRESS AND HOLD": PRESS THE BUTTON AND HOLD FOR AT LEAST 2 SEC-
ONDS.

2 Vehicle

Summary of Contents for RS 660 2020





































































































































































































Search results

Summary of Contents for RS 660 2020

Reviews:

APRILIA RS 660 2020, Manual, Page: 73 / 196

Search results

Summary of Contents for RS 660 2020

Reviews: