86
use and maintenance
Pegaso 650 I.E.
CHANGING THE REAR LIGHT
BULB
Carefully read p. 83 (BULBS).
NOTE
The rear light houses two parking
light/stoplight bulbs (1).
The following operations refer to a single
bulb, but are valid for both.
B e f o r e c h a n g i n g a b u l b , c h e c k t h e
efficiency of the stoplight switches, see p.
80 (CHECKING THE SWITCHES).
u
Position the vehicle on the stand, see p.
49 (POSITIONING THE VEHICLE ON
THE STAND).
u
Unscrew and remove the two screws (2).
u
Remove the protection screen (3).
NOTE
Upon reassembly, correctly
position the protection screen in its seat.
Tighten the screw (2) carefully, without
exerting too much pressure, in order to
avoid damaging the protection screen.
u
Press the bulb (1) slightly and rotate it
anticlockwise.
u
Extract the bulb (1) from its seat.
CAUTION
Insert the bulb in the bulb socket,
making the two bulb pins coincide with
the relevant guides on the socket.
u
Correctly install a new bulb of the same
type.
CHANGING THE NUMBER PLATE
BULB
Carefully read p. 83 (BULBS).
To change, proceed as follows:
u
Position the vehicle on the stand, see p.
49 (POSITIONING THE VEHICLE ON
THE STAND).
u
Unscrew and remove the screw (4),
taking the nut.
u
Remove the light unit (5).
CAUTION
Do not pull the electric wires to extract
the bulb socket.
u
Grasp the bulb socket (6), pull it and
remove it from its seat.
u
Withdraw the bulb (7) and replace it with
a new one of the same type.
