manualshive.com logo in svg

APRILIA ETX 125, Manual

Share
Download
APRILIA ETX 125 Manual Download Page 22

22

use and maintenance   ETX 125

 

BRAKE FLUID - recommendations

 

This vehicle is provided with
front and rear disc brakes, with

separate hydraulic circuits.
The following information refers to a
single braking system, but is valid for
both.

Sudden resistance or clearance
problems on the brake lever may
be due to troubles in the hydrau-

lic system.
For any doubt regarding the perfect
functioning of the braking system and
in case you are not able to carry out the
usual checking operations, contact
your 

 

aprilia

 

 Official Dealer .

Make sure that the brake discs
are neither oily nor greasy, espe-
c i a l l y   a f t e r   m a i n t e n a n c e   o r

checking operations.
Check that the brake cables are neither
twisted nor worn out.
Prevent water or dust from accidentally
getting into the circuit.

In case maintenance operations are to
be performed on the hydraulic circuit, it
is advisable to use latex gloves.

If the brake fluid gets in contact with the
skin or the eyes, it can cause serious ir-
ritations.
Carefully wash the parts of your body
that get in contact with the liquid. 
Consult a doctor or an oculist if the liq-
uid gets in contact with your eyes.

Do not dispose of the brake fluid in the
environment.

KEEP AWAY FROM CHILDREN

When using the brake fluid, take
care not to spill it on the plastic
o r   p a i n t e d   p a r t s ,   s i n c e   i t

damages them irreparably.

 

DISC BRAKES

 

The brakes are the parts that
most ensure your safety and for
this reason they must always be

perfectly working; check them before
every trip.

The brake fluid must be changed once a
year by an 

 

aprilia

 

 Official Dealer .

Use brake fluid of the type specified in
the lubricant chart, see p. 72 (LUBRI-
CANT CHART).

 

When the disc pads wear out, the level of
the fluid inside the reservoir decreases to
automatically compensate for their wear.

The front brake reservoir is positioned
near the front brake lever coupling.

The rear brake reservoir is positioned on
the right side of the vehicle, before the air
filter casing.

Periodically check the brake fluid level in
the tanks, see p. 23 (FRONT BRAKE),
p. 24 (REAR BRAKE) and the wear of the
pads, see p. 52 (CHECKING THE BRAKE
PAD WEAR).

c

a

a

a

a

Summary of Contents for ETX 125

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands