APRILIA ETV mille, Workshop Manual

Page: 333 / 352

ETV mille
REPAIR INFORMATION
8
- 24 -
00
Release 00/2004 - 04
8.4 ELECTRICAL SYSTEM INSPECTION
8.4.1 ENGINE
See Section 3 (ENGINE) for technical information on and
specifications of engine components.
8.4.2 THROTTLE BODY COMPONENTS
See 4.8 (THROTTLE BODY) for technical information on
and specifications of engine components.
8.4.3 FUEL SYSTEM
- Inlet/outlet hoses of pressure filter (ID = 7.5 mm; OD =
14.5 mm) are made from NBR-SF-NBR to DIN 73379
specification.
- High-pressure delivery hose is made from TEFLON,
with inlaid metal braiding and eyelet terminals.
- Low-pressure return hose (ID = 6 mm; OD = 12 mm) is
made from NBR-SF-NEOPRENE to DIN 73379 specifi-
cation.
8.4.4 ELECTRICAL SYSTEM
See 1.5 (SPECIFICATIONS). See also Section 6 (ELEC-
TRICAL SYSTEM).
8.4.5 FRONT BRAKING SYSTEM
- Brake discs = steel.
- Disc thickness = 5 mm (service limit: 4.5 mm).
- Disc diameter = 300 mm.
- Number of caliper pistons = 4 opposite pistons.
- Diameter of caliper pistons = 30 mm (lower pistons) +
34 mm (upper pistons).
- Brake pads = sintered.
- Brake pad lining (standard) = TOSHIBA TT 2802.
- Brake pad lining (option) = FERIT/FERODO ID 450.
- Brake pad surface = 23.68 sq. cm.
- Rubber hose diameter (standard) = OD 10 mm;
ID 3.2 mm.
- Diameter of metal-braided hoses (option) = OD 7 mm;
ID 3.2 mm.
- Master cylinder diameter = 16 mm.
8.4.6 REAR BRAKING SYSTEM
- Brake disc = steel.
- Disc thickness = 5 mm (service limit: 4.5 mm).
- Disc diameter = 255 mm.
- Number of caliper pistons = 2 opposite pistons.
- Diameter of caliper pistons = 28 mm.
- Brake pad lining (standard) = FERIT/FERODO ID 450.
- Brake pad lining (option) = TOSHIBA TTH38GF
FERIT/FERODO ID 450/452/459.
- Brake pad surface = 16 sq. cm.
- Rubber hose diameter (standard) = OD 10 mm;
ID 3.2 mm.
- Diameter of metal-braided hoses (option) = OD 7 mm;
ID 3.2 mm.
- Master cylinder diameter = 11 mm.