03_15
Justering af greb til forbremse (03_15)
The distance between the end of the lever (1) and the handgrip (2) can be adjusted
by rotating the set screw (3).
The MAX and MIN clicks correspond to a lever end-handgrip distance of about 114
mm (4.49 in) and 96 mm (3.78 in) respectively.
•
Push the control lever (1) forward and turn the set screw (3) until the lever
(1) is at the desired distance.
03_16
Clutch lever adjustment (03_16)
The distance between the end of the lever (1) and the handgrip (2) can be adjusted
by rotating the set screw (3).
The MAX and MIN clicks correspond to a lever end-handgrip distance of about 118
mm (4.65 in) and 115 mm (4.53 in) respectively.
•
Push the control lever (1) forward and turn the set screw (3) until the lever
(1) is at the desired distance.
Running in
Running in is essential to ensure the durability of the vehicle. During the first 1000 Km
(621.37 mi), observe the following rules to ensure the reliability and performance of
the vehicle throughout its lifetime:
•
Avoid full throttle starts and hard acceleration;
•
Avoid hard or prolonged braking;
•
Do not ride for prolonged periods at sustained high speed; preferably ride the
motorcycle on varied routes with frequent, gentle acceleration and deceler-
ation;
74
3 Use
Summary of Contents for DORSODURO 750 ABS 2015
