manualshive.com logo in svg

APRILIA AREA 51, Manual, Page: 20 / 73

Share
Download
APRILIA AREA 51 Manual Download Page 20

20

use and maintenance  Area 51

,*1,7,21 6:,7&+

The ignition switch is positioned on the
right side, near the steering column.

The key (1) operates the ignition
switch/steering lock and the

saddle lock.
Two keys are supplied together with the
vehicle (one spare key).

67((5,1* /2&.

Never turn the key to position “

+

” in

running conditions, in order to avoid
losing control of the vehicle.

OPERATION

To lock the steering:

◆

Turn the handlebar completely leftwards.

◆

Turn the key (1) to position “

” and

press it.

Turn the key and steer the han-
dlebar at the same time.

◆

Rotate the key (1) anticlockwise (left-
wards), steer the handlebar slowly until
the key (1) reaches position “

+

”.

◆

Extract the key.

Position

Function

Key 

removal

+

Steering 

lock

The steering 
is locked. 
It is neither 
possible to 
start the en-
gine, nor to 
switch on the 
lights.

It is possible 
to remove 
the key.

Neither the 
engine, nor 
the lights can 
be switched 
on.

It is possible 
to remove 
the key.

The engine 
and the lights 
can be 
switched on.

It is not pos-
sible to re-
move the 
key.

Summary of Contents for AREA 51










































































Reviews:

No comments