manualshive.com logo in svg

Aprilaire 8553, Owner'S Manual

Share
Download
Aprilaire 8553 Owner'S Manual Download Page 20

– 18 –

EQUIPMENT CONTROL

•

Turning on the Fan:

At any time the system fan can run continuously by pressing the 

FAN

button. 

Note that a 

Fan

icon, “                   “, appears in the lower part of the display indicating that the fan is

continuously operating. To return the fan to the normal operating mode, press the 

FAN

button again

which will remove the icon from the display. In the normal operating mode the fan will only run when

the furnace/air conditioner is operating. Continuous fan operation is beneficial if your system is

equipped with a high efficiency air cleaner or a humidifier, or to circulate air in the home.

•

Selecting Cooling Mode:

Press the 

MODE

button until the word "

COOL

" appears on the display. 

In this mode the air conditioner will maintain temperature according to the programming previously

completed unless an override temperature has been entered. Note that a 

Snowflake

icon, “          “, 

is on the display, which flashes when the air conditioner is running. 

•

Selecting Heating Mode:

Press the 

MODE

button until the word "

HEAT

" appears on the display. 

In this mode the furnace will maintain temperature according to the programming previously

completed unless an override temperature has been entered. Note that a 

Flame

icon, “     ,“ is on 

the display, which flickers when the furnace is running. 

110-790B  7/11/01  3:11 PM  Page 20

Summary of Contents for 8553

































Reviews:

No comments

Brands by name

Popular brands

Load more brands