background image

B2202104    REV. 11/99

110-904

P.O. BOX 1467 • MADISON, WI 53701-1467

Products For Better Indoor Air Quality

The Aprilaire

®

Total Indoor Air Comfort System is an integrated group of air quality enhancement 

products designed to work with your heating and cooling system to make your home more comfortable. 

For the best in indoor air quality, ask your heating and cooling contractor about these fine 

Aprilaire products, or visit us at 

www.aprilaire.com for your Indoor Air Solutions.

Automatic Humidifier

The Best Cure For Dryness

®

The world’s first computer-equipped,

completely automatic humidifier.

High Efficiency Air Cleaner

Nobody Makes Clean Air Easier

®

The economical, trouble-free, high

efficiency air cleaner for your home.

Fresh Air Exchanger

Only The Freshest Homes Have April Air

Your best value for a constant, controlled

supply of fresh air with energy-recovery.

Zone Control System

Custom Comfort Throughout Your Home

®

The most reliable way to achieve temperature 

control in every area of your home.

Electronic Thermostat

Energy Efficiency Never Looked So Good

Ultra-thin, easy-to-use programmable or digital

controls featuring pinpoint accuracy.

110-904  7/11/01  4:29 PM  Page 24

Summary of Contents for 8551

























Reviews: