6
Step 11.
The ball catch can be adjusted in and out using the adjustment
tool to ensure the door panel closes smoothly.
Note:
Push the ball catch inside of the hole then turn left or right.
But do not adjust out the ball catch too much.
Step 10.
Fit the handle to the door.
24 HRS
DO NOT USE THE
ENCLOSURE FOR
24 HOURS AFTER
SEALING
Applying Silicone Sealant
Sealing Inside
Seal from the top of the wall profile to the bottom on the
INSIDE
between the wall profile and the wall.
IMPORTANT:
Do not apply sealant on inside of the tray.
Sealing Outside
Seal from the top of the wall profile to the bottom between the
wall profile and tiles on both sides. Also seal along the bottom
where the frame meets the tray. Seal the joints between the
bottom profile and any upright profiles.
Step 11
Step 10
Step 9.
Fit the upriht profile top cap (
No 6
) and inline post top cap (
No.7 or 8
) as shown.
Step 8.
Once you are happy that the installation is correct, push 5 x Profile Clips (No.5) in to the wall profile and evenly space.
Push the Cover Profile (No.3) into the Profile Clips as shown.
Step 9
